Multifunctional Automatic Egg Tray Pad Printing Machine Egg Carton Production Line

Equipment process

1. Pulping system

(1) Put the raw materials into the pulping machine, add an appropriate amount of water, and stir for a long time to turn the waste paper into pulp and then put it into the pulp storage tank for storage.

(2) Put the pulp in the storage tank into the mixing tank, and adjust the pulp concentration in the mixing tank. The white water in the return tank and the thick slurry in the storage tank are further stirred by the homogenizer. After being adjusted into suitable pulp, it is put into the supply tank to be used by the forming system.

Equipment used: pulping machine, homogenizer, slurry supply pump, vibrating screen, pulp decomposer

2. Molding system

(1) The pulp in the supply tank is fed into the forming machine, after being adsorbed by the vacuum system, the pulp is passed through the mold on the equipment, leaving the pulp on the mold to form, and the white water is absorbed and driven back into the pool by the vacuum pump.

(2) After the mold is adsorbed, the transfer mold passes the positive pressure out of the air compressor, and the molded product is blown from the forming mold to the transfer mold, and then sent out by the transfer mold.

Equipment used: molding machine, mold, vacuum pump, negative pressure tank, water pump, air compressor, mold cleaning machine

3. Drying system

(1) Natural drying method: The product is dried directly by weather and natural wind.

(2) Traditional drying: brick tunnel kiln, heat source can choose natural gas,  coal, dry firewood,

Heat sources such as liquefied petroleum gas.

(3) New-type multi-layer drying line: The 6-layer metal drying line can save more than 30% energy than transmission drying. The main heat source is natural gas,  liquefied petroleum gas, methanol and other clean energy sources.

4. Finished product auxiliary packaging

(1) Automatic stacking machine

(2) Packing machine

(3) Transfer conveyor

Service before sale
1, 24 hours online .Your inquiry will be quick reply by email . 
 Also can go through all questions with you by any online chatting tools (Wechat ,Whatsapp ,Skype ,Viber ,QQ ,TradeManager ) 

2,Professionally and patiently introduction,details pictures and working video to show machine

Service on sale
1,Test every machine and inspect the machine seriously . 

2,Send the machine picture which you order , then packing it with standard export wooden box after you confirm the machine is ok .

3,Delivery:If ship by sea .after delivery to seaport .Will tell you the shipping time and arrival time . Finally, send all original documents to you by Express For Free. 
If delivery it by Express to your door(DHL, TNT,Fedex, etc) or by air to your airport, Or logistic to the warehouse which you request . We will tell you the tracking number after delivery.

Service after sale
1, Free insurance for goods

2, 24 hours online to solve any problem . Supply you English manual book and technical support , maintain and install video to help you solve the problem, or dispatch worker to your factory.

1. Stretch film inside and plywood case(non-fumigation woden package) outside is applied for machine,which is safe and to meet the international standard transport.

2. Shipping by sea with container or by air is usual as your request.

Equipment process

1. Pulping system

(1) Put the raw materials into the pulping machine, add an appropriate amount of water, and stir for a long time to turn the waste paper into pulp and then put it into the pulp storage tank for storage.

(2) Put the pulp in the storage tank into the mixing tank, and adjust the pulp concentration in the mixing tank. The white water in the return tank and the thick slurry in the storage tank are further stirred by the homogenizer. After being adjusted into suitable pulp, it is put into the supply tank to be used by the forming system.

Equipment used: pulping machine, homogenizer, slurry supply pump, vibrating screen, pulp decomposer

2. Molding system

(1) The pulp in the supply tank is fed into the forming machine, after being adsorbed by the vacuum system, the pulp is passed through the mold on the equipment, leaving the pulp on the mold to form, and the white water is absorbed and driven back into the pool by the vacuum pump.

(2) After the mold is adsorbed, the transfer mold passes the positive pressure out of the air compressor, and the molded product is blown from the forming mold to the transfer mold, and then sent out by the transfer mold.

Equipment used: molding machine, mold, vacuum pump, negative pressure tank, water pump, air compressor, mold cleaning machine

3. Drying system

(1) Natural drying method: The product is dried directly by weather and natural wind.

(2) Traditional drying: brick tunnel kiln, heat source can choose natural gas, coal, dry firewood,

Heat sources such as liquefied petroleum gas.

(3) New-type multi-layer drying line: The 6-layer metal drying line can save more than 30% energy than transmission drying. The main heat source is natural gas, liquefied petroleum gas, methanol and other clean energy sources.

(4) Auxiliary packaging of finished products

(1) Automatic stacking machine

(2) Packing machine

(3) Transfer conveyor

Cheap top best-selling boutique wholesale best-selling machinery
Q1: How to choose the suitable products?

You only need to confirm your material and target price. We will provide you with a solution.

Q2: How about your MOQ?

Different products, MOQ will be different, you can contact us for details.

Q3: How is the quality?

Our company has a completely scientific quality management system. We guarantee the high efficiency performance of each product.

Q4: What can we do if your item doesn't work well?

Please email or call us, we will give analysis and solution as soon as we can.

Q5: Price, price, price?

We promise that you will get the best quality with the most reasonable pricing.