Find 8 Chambers Stenter Machine, 2600 Mm Stentering Machine, Heat Setting Machine on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Home > Products > Hot air circulation drying machine > Tentering And Stentering machine

Tentering And Stentering machine

  • Tentering And Stentering machine
  • Tentering And Stentering machine
  • Tentering And Stentering machine
  • Tentering And Stentering machine

Tentering And Stentering machine

    Unit Price: 208000~310000 USD
    Min. Order: 1 Set/Sets
    Transportation: Ocean
    Port: Jiangmen,Shenzhen,Guangzhou

Basic Info

Model No.: PD

Product Description


PD-Tensioning machine


This is a new type stenter heat setting machine,it can be widely used in the finishing process of woven goods, knitted fabrics and other textiles.

Scope of supply:

1. Cloth feeding device

1)Cloth entry rack

2)electric motor type inlet cloth rack into cloth width setting device

3)Tension adjustment mechanism

4)Slat type centering device


Product images

PD-stenter 4

PD-stenter 5

PD-stenter 6

PD-stenter 7



Stenter machine

Design range

1) Single layer, level recovery pin chain, up and down hot air circulation.

2)Cloth style:

Suitable for all kinds of cloth, especially for handle and shrinkage

3)Working width: 600-2300mm

4)mechanical design speed: 0-100 M/MIN (M/MIN)

5)Main power supply: 380 VOLT 50 HZ 3 PH.

6)Maximum temperature: 220 degrees.

7)Shrink code device: adjustable range of shrinkage code -20~+100 more

8)Main transmission: motor 25HP and transmission parts.

9)Heating method: conduction oil

10) Color: main body: blue Cabinet cover: gray blue


Scope of supply

Setting operation area

1)Stainless steel cloth guide roll

2)Centralized control console:

3)Monitoring synchronization, overfeed, speed

4)Transmission roller, shrink code, and 12 inch touch screen is LG.

5)Double padder( For 6 and 8 chambers)



Finalized cloth entry area

1) Box structure for cloth entry

2)Transmission rope,1HP motor and transmission parts, Stainless steel fabric holder.

3)Upper cloth entry: 320MM rubber roller,3HP frequency conversion special motor 1 set

4)Bottom cloth entry:320MM rubber roller,3HP frequency conversion special motor 1 set

5) Diameter 114MM stainless steel spiral roller,2HP motor drive and transmission parts. 2 pcs

6) Diameter 114MM electric button weft aligning roll. 1 set

7)Pinning device, including 1/4 HP frequency conversion special motor, transmission parts, pinning rubber wheel and pinning brush.

8) Lower bracket allocated with the lower belt driving group. 1 pair

9)Overfeed pinning system, adjustable RANGE is -20 ~ +100﹪.

10) Safety device for track width. 1 pcs

11)Tentering track is 6.3 meters.

12)Digital speed control system for tension distribution, overfeed pinning PLC is LG.

13)Pneumatic decurler is Shanghai HeTian.

14)Cloth edges controller is of Foshan HuaGao Electronics.

15)Brush wheel.

16) Anti-loosening device and safety device.


Drying and setting chamber, parts of each chamber:

1)Track length of each chamber is 3 meters.

2)The oven is made of U-iron and Angle iron. With new rock wool for insulation.

3) Turbine design windmill and 1 motor drive,upper:10HP, lower: 10HP.

4)2 motors allocated with 1 Frequency converter.

5)Hot air nozzle vertically blowing (24 pipes) which is customized according to customer samples, with a gap of 150 mm.

6)Temperature sensing probe.

7)Extraction hot air circulation filter.

8)Up and down wind adjustment by frequency conversion.


7.Track with beam, horizontal reciprocation

1)Chain track is made of cast iron, resistant to high temperature and without deformation

2)With abrasion resistant metal slide plate.

3)Pin plate, pin plate seat and RP 172 adopts oil-lubricated chain.


8. Cooling device

1)Air cooling device, with 2 sets of 3HP blower.

2) Track length of cooling zone: 2800mm


9. Main driving

1)Driven by 25HP special motor and transmission parts.


10.Working width adjustment mechanism

1)Rear setting and cloth-exit area adjusted by 3HP motor.

2) Front tentering area adjusted by 1HP motor

3) Beam of tentering 2nd,3rd and cloth-exit area allocated with manual handle adjustment.( With slat roller)


11 .Exhaust windmill

1)Exhaust windmill (front 5HP, rear 7.5 HP motor with transmission parts.( With inverter)

[exhaust duct made by manufacturer]

12.Cloth-exit device

1)Box structure

2)Cloth lifting device

3)Edges cutting device and trimming suction device

4)Cloth-exit transmission roller,2HP motor and driving parts.

5)Plating roller,2HP motor and driving parts.

6)Track chain turning head, gear box and transmission device.

7) Electrostatic elimination rod and host device

8)PLC digital speed control system, overfeed pinning control

9)Cam With motor, frequency converter and transmission parts

10) Stainless steel cloth guiding roller

11)Cloth-exit device


13. Main control cabinet

A. Main apparatus are respectively installed in the control cabinet

B. Main control cabinet contains breaking appliances

C. Electromagnetic contactor

D. Relay

E. Transformer

F. Cooling fans of control cabinet (6 "* 9 sets)

G. Voltage stabilizer


14.Camera monitor system 1 set

15.Speedometer (metric) 2 pcs

16. width gauge (metric) 2 pcs

17.Length table (metric system) 1 pcs

18. Interphone 1 set

19.Secondary side wiring material (control cabinet to machine)

20.Basic diagram, structure diagram, circuit diagram, maintenance operation manual.


21. Spare parts

1)Overfeed pinning device 2 pcs

2)Needle plates 50 pcs

3)Needle plate seats 20pcs

4)Round brush 10 pcs

5)Screw square nut (for oven) 4 pcs

6)Screw square nut (for exit cabinet) 2 pcs

7)chains 10 pcs

8)Tool box 1 pcs

9)Overfeed belts 10 pcs

10)Dust filters 2 pcs


22.Brand of main parts

1)Main transmission motor and reduction motor Foshan Watman.

2) Programmable controller LG

3) Overfeed needle PLC LG

4) Low-voltage electrical appliance LG

5) Blowing type edge spreader Shanghai HeTian

6) Edge tracker Foshan HuaGao Electronics

7)Inverter SINEE


23. Buyer preparation

1)Basic cement project in the machine site.

2)Piping and piping insulation materials

3) Materials of exhaust pipe and chimney

4) Electric wiring of water source, power source to control cabinet.

5)Assistant workers during machine installation and trial period.

6) Heating conduit materials and piping works.








HESHAN CITY HONGFA COMPLETE SOLUTIONS MACHINE LTD.

  • 1
  • 2
 

Heshan City Hongfa Complete Solutions Machine Ltd. locates in the pearl river Delta of GuangDong province, the area is renowned of manufacturing high quality textile machines.


As an experienced manufacturing factory since 1994, we offer you a vast range of textile machineries,such as dyeing,washing,drying, finishing machines,stenter etc.Our machines are popular in both domestic and aboard.


Customer's satisfaction leads to our continuously innovation.High quality and long-term cooperation is our eternal purpose.

Company Info

  • Company Name: HESHAN CITY HONGFA COMPLETE SOLUTIONS MACHINE LTD.
  • Representative: Ai li Xie
  • Product/Service: Dyeing Machines , Dye Vats , Garment Dyeings , Washing Machines , Hydro Extractors , Stenters Machines
  • Capital (Million US $): 310,0000RMB
  • Year Established: 2004
  • Total Annual Sales Volume (Million US $): US$1 Million - US$2.5 Million
  • Export Percentage: 51% - 60%
  • Total Annual Purchase Volume (Million US $): Below US$1 Million
  • No. of Production Lines: 2
  • No. of R&D Staff: 5 -10 People
  • No. of QC Staff: 5 -10 People
  • OEM Services Provided: yes
  • Factory Size (Sq.meters): 5,000-10,000 square meters
  • Factory Location: Zhennan Industrial Area,#70-4,Heshan City,Guangdong,China
  • Contact Person: Ms. Dellali
  • Tel: 86-750-8828923
Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters