September season CBD processing hemp harvest drying machine

 September season CBD processing hemp harvest drying machineIntroduction:
Multi-layer belt hot air circulation dryer is a continuous drying equipment of batch production.
Widely used for flakes, strips, granular materials with better permeability, especially for dehydrated vegetables and Chinese medicine pieces with high water content but does not allow high temperature;
Heat source can be gas, coal, steam, biomass, oil, electricity and so on.
Tecnnical parameter:

Technical parameter
Spec.		DW-1.2-8	DW3-1.2-10	DW-1.6-8	DW-1.6-10	DW-2-8	DW-2-10	DW-2-20
Unit number		4	5	4	5	4	5	10
Belt width	m	1.2		1.6		2
Belt length	m	8	10	8	10	8	10	20
Thickness of the material	mm	10 to 80
Temperature	℃	50-140
Steam pressure	Mpa	0.2-0.8
Steam consumption	kg/h	120-300	150-375	150-400	180-500	180-500	225-600	450-1200
Drying time	h	0.2-1.2	1.25-1.5	0.2-1.2	0.25-1.5	0.2-1.2	0.25-1.5	0.5-3
Drying capacity	kg H2O/h	60-160	80-200	850-220	100-260	100-260	120-300	240-600
Power	kW	11.4	13.6	14.6	18.7	19.7	24.5	51
Overall dimensions	m	9.56*1.49*2.3	11.56*1.49*2.3	9.56*1.9*2.4	11.56*1.9*2.4	9.56*2.32*2.5	11.56*2.32*2.5	21.56*2.32*2.5
Weight	kg	4500	5600	5300	6400	6200	7500	14000
Note: For the drying temperature at 250-350 ℃, the company can design specially  according to the actual material

Advantages:
Fast drying speed, high evaporation intensity and good product quality.1, can adjust the air volume, heating temperature, material residence time and feeding speed to achieve the desired drying effect2, flexible equipment configuration, you can use the belt belt washing system and material cooling system.3. Most of the air is recycled, which saves energy.4. The heat source can be equipped with steam, heat transfer oil, electricity or coal-fired (oil) hot blast stove.5, for mass production, continuous uninterrupted drying, saving labor;
 Working principle:
Products are sent by conveyor to feeding inlet and continuously spread evenly to the upper transmission belt , upper belt forwards through heated and sealed tunnel and transfers to the second layer belt ……
Finally dried material is discharged from the outlet to complete the drying process.(1)Hot air from bottom-up and top-down crosses through material, increasing the contact area between the hot air and the material, improving drying speed.(2)At the bottom, the inner cavity is fully welded with rounded corners, there will be no unorganized airflow with the outside world in working condition, ensuring convenient cleaning air and no water inside the equipment and the cleanliness of each drying items.(3)It is equipped with mandatory de-humidity device , most hot air are recycled to save energy, part of the hot and humid air is discharged from chamber to ensure product quality.(4)Adopting fully enclosed structure, in addition to de-humidity duct, it has no outer duct, ensuring that material is not contaminated, improving the thermal efficiency and working conditions.(5)Adopting unique internal air supply device, can not only improve the relative velocity of material and hot air, improve drying speed, and also guarantee uniform drying.(6)Hot air inlet is built in the center, and a specially crafted filter is set in the air inlet of the heater, not only filtering the fine powder and debris, but also can ensure that the heater is internally clean; there is also a door on one side , which is easy to access and clean.(7)Dryer has multiple layers, the material can be rolled over from the top layer to lower layer.(8)Belt speed adopts frequency adjustment, adjustable according to requirements.(9)All air inlet is equipped with the filter to ensure clean air intake .(10)All circulation fan are centrifugal fan with high wind pressure, large air volume, low energy consumption and high air penetration rate.(11)Heat preservation: 50mm insulation with polyurethane materialApplication:Belt dryer is a commonly used continuous drying equipment, which can be widely used in chemical, food, medicine, building materials, electronics and other industries. It is especially suitable for the drying of flakes, strips and granular materials with good ventilation. The paste material can also be dried after being shaped by a Granulator or a stripping mechanism, such as pigmentdrying. Packaging & Shipping Our Services Company Information FAQ 

Contact us if you need more details on Belt Dryer Equipment For Hemp Flower. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Continuous Drying Machine Cbd Extract、Conveyor Hot Air Dehydrator. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Hot air circulation drying machine > Multi-layer belt hot air circulation dryer